The Journey Tarp by Hammock Gear

Ships in 1-2 business days | Based in Columbus, OH | Est. 2009

Lightweight and durable with minimal stretch, the silicone-impregnated ripstop polyester fabric 1.1oz/yd² (20D) of the Hammock Gear Journey Tarp will keep you out of the elements.

This durable, ultralight backpacking tarp system with doors is both water and windproof, and resists the retention of water much better than traditional nylon tarps and tents. Reinforced with 210D Polyester, all tie-outs are built with grosgrain featuring 1/2" Beastee D-Rings on the 6 perimeter tie-outs, four door tie-outs, four panel pull-outs, and 3/4" Beastee D-Rings on the ridgeline tie-outs.

Note: The four diamond panel pull-outs require seam sealing (kit included). Many find that seam sealing the ridgeline of the tarp is not necessary, but it is recommended. 

• Reinforcement panels at high-stress areas
• Front wings provide storm coverage while pitching taught at a range of heights
• Silpoly is hydrophobic, meaning that it is made from nonpolar molecules that repel water. Combined with an additional waterproof sealing, it can be quite effective against heavy rainfall.
• Does not sag or stretch when wet

Includes:

• The Journey Tarp
• Seam Sealing Kit
• Stuff Sack

_______________________________________________

Specs

Capacity: 1 hammock

Doors: 4

Dimensions:

• Ridgeline Length: 11ft (132") | 335.3
  
• Baseline Length: 78" | 198.1cm
• Footprint Width: 111" | 281.9cm (measured from the middle of the baseline)
• Packed Size: 8.5" x 5" x 2.5" | 21.6cm x 12.7cm x 6.4cm

Tie Outs: 4 corners, 2 center, 4 doors, 2 ridgeline, 4 panel pullouts

Weight: 16.37oz | 464g

Needed for Set Up: NOT Included

• Guylines
• Minimum of 8 Stakes

Materials:

• Fabric: 20D Silpoly (Silicone impregnated polyester), 1.1oz/yd²
• Tie out reinforcements: 210D Polyester 
  
• Hardware: 1/2" and 3/4" D-Rings

Made in the U.S.A.

***Discounts are not available on Hammock Gear products.